TOYOTA 2010 Sienna - Manual (Page 128)

101
1-4. Opening and closing the windows
1
Before driving
■
The power windows can be operated when
The engine switch is in the “ON” position.
■
Operating the power windows after turning the engine off
The power windows can be operated for approximately 45 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. They cannot, how-
ever, be operated once either front door is opened.
■
Jam protection function (driver’s window on type B only)
If an object becomes caught between the window and the window frame,
window travel is stopped and the window is opened slightly.
■
When the battery is disconnected
The power windows must be initialized in order to ensure proper operation.
(Perform for each window with the switch for each seat.)
Open the window halfway.
Fully close the window by pulling the switch up and continue hold-
ing the switch for one second.
CAUTION
■
Closing the windows
Observe the following precautions.
Failing to do so may result in death or serious injury.
●
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
●
Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.
■
Jam protection function
●
Never try jamming any part of your body to activate the jam protection
function intentionally.
●
The jam protection function may not work if something gets caught just
before the window fully closes.
STEP 1
STEP 2