Outside mirrors -28 – NISSAN 2012 Maxima User Manual

Page 155

Advertising
background image

OUTSIDE MIRRORS

The outside mirror remote control will operate
only when the ignition switch is in the ACC or ON
position.

Move the small switch

1

to select the right or left

mirror. Adjust each mirror to the desired position
using the large switch

2

.

WARNING

Objects viewed in the outside mirror on

the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.

Do not adjust the mirrors while driving.

You could lose control of your vehicle
and cause an accident.

Automatic anti-glare outside mirror
(Driver’s side only) (if so equipped)

The driver’s outside mirror will automatically dim
during nighttime conditions to reduce the glare
from the headlights of trailing vehicles. The auto-
matic anti-glare feature operates only when the
ignition switch is placed in the ON position.

The automatic anti-glare feature will be on when
starting the vehicle. The indicator light on the
automatic anti-glare rearview mirror will illuminate
when the automatic anti-glare feature is on.

To turn off the automatic anti-glare feature, press:

● the O button on rearview mirror without

compass (Type B).

● the

button on rearview mirror with

compass (Type C).

The indicator light will turn off.

To turn on the automatic anti-glare feature again,
press:

● the | button on rearview mirror without

compass (Type B).

● the

button

on

rearview

mirror

equipped with compass (Type C).

The indicator light will turn on.

For information on the automatic anti-glare rear-
view mirror, see “Automatic anti-glare rearview
mirror” in this section.

Reverse tilt-down feature (if so
equipped)

The reverse tilt-down feature will turn both out-
side mirror surfaces downward to provide better
rear visibility close to the vehicle when the small
switch is in either the L or R position.

NOTE:

If the outside mirror control switch is in the
neutral position, neither mirror will turn
downward when the shift selector is moved
to R (Reverse).

LPD0237

3-28

Pre-driving checks and adjustments

Advertising
This manual is related to the following products: