Push-button ignition switch positions -8 – NISSAN 2012 Maxima User Manual

Page 331

Advertising
background image

When the ignition switch is pushed without de-
pressing the brake pedal, the ignition switch po-
sition will illuminate as follows:

Push the ignition switch center:

● once to change to ACC.
● two times to change to ON.
● three times to return to OFF.

The ignition switch will automatically return to the
LOCK position when any door is either opened or
closed with the switch in the OFF position.

The ignition lock is designed so that the ignition
switch position cannot be switched to OFF until
the shift selector is moved to the P (Park) posi-
tion.

When the ignition switch cannot be pushed to-
ward the OFF position, proceed as follows:

1. Move the shift selector into the P (Park)

position.

2. Push the ignition switch. The ignition switch

position will change to the ON position.

3. Push the ignition switch again to the OFF

position.

The shift selector can be moved from the P
(Park) position if the ignition switch is in
the ON position and the brake pedal is
depressed.

If the battery of the vehicle is discharged,
the push-button ignition switch cannot be
moved from the LOCK position.

Some indicators and warnings for operation are
displayed on the vehicle information display. See
“Vehicle information display” in the “Instruments
and controls” section of this manual.

PUSH-BUTTON IGNITION SWITCH
POSITIONS

LOCK (Normal parking position):

The ignition switch can only be locked in this
position.

The ignition switch will be unlocked when it is
pushed to the ACC position while carrying the
Intelligent Key or with the Intelligent Key inserted
in the port.

The ignition switch will lock when any door is
opened or closed with the ignition switched off.

OFF:

The ignition switch is in the OFF position when
the engine is turned off using the ignition switch.
No lights will illuminate on the ignition switch.

ACC (Accessories):

This position activates electrical accessories,
such as the radio, when the engine is not running.

ACC has a battery saver feature that will turn the
ignition switch to the OFF position after 30 min-
utes under the following conditions:

● all doors are closed.
● shift selector is in P (Park).

LSD2000

5-8

Starting and driving

Advertising
This manual is related to the following products: