Break-in schedule -19 – NISSAN 2012 Maxima User Manual

Page 342

Advertising
background image

To set cruising speed, accelerate the vehicle to
the desired speed, push the COAST/SET switch
and release it. Take your foot off the accelerator
pedal. Your vehicle maintains the set speed.

To pass another vehicle, depress the ac-

celerator pedal. When you release the
pedal, the vehicle returns to the previously
set speed.

● The vehicle may not maintain the set speed

when going up or down steep hills. If this
happens, drive without the cruise control.

To cancel the preset speed, use one of the
following three methods.

● Push the CANCEL button.
● Tap the brake pedal.
● Push the ON·OFF switch off. The CRUISE

indicator light in the instrument panel goes
out.

The cruise control is automatically canceled if:

● you depress the brake pedal while pushing

the ACCEL/RES or SET/COAST switch.
The preset speed is deleted from memory.

● the vehicle slows down more than 8 MPH

(13 km/h) below the set speed.

● you move the shift selector to N (Neutral).

To reset at a faster cruising speed, use one
of the following three methods.

● Depress the accelerator pedal. When the

vehicle attains the desired speed, push and
release the COAST/SET switch.

● Push and hold the ACCEL/RES switch.

When the vehicle attains the speed you de-
sire, release the switch.

● Push and release the ACCEL/RES switch.

Each time you do this, the set speed in-
creases by about 1 MPH (1.6 km/h).

To reset at a slower cruising speed, use one
of the following three methods.

● Lightly tap the brake pedal. When the ve-

hicle attains the desired speed, push the
COAST/SET switch and release it.

● Push and hold the COAST/SET switch. Re-

lease the switch when the vehicle slows to
the desired speed.

● Push and release the COAST/SET switch.

Each time you do this, the set speed de-
creases by about 1 MPH (1.6 km/h).

To resume the preset speed, push and re-
lease the ACCEL/RES switch. The vehicle re-
turns to the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).

CAUTION

During the first 1,200 miles (2,000 km),
follow these recommendations to obtain
maximum engine performance and en-
sure the future reliability and economy of
your new vehicle. Failure to follow these
recommendations may result in short-
ened engine life and reduced engine
performance.

● Avoid driving for long periods at constant

speed, either fast or slow, and do not run the
engine over 4,000 rpm.

● Do not accelerate at full throttle in any gear.
● Avoid quick starts.
● Avoid hard braking as much as possible.
● Do not tow a trailer for the first 500 miles

(800 km). Your engine, axle or other parts
could be damaged.

BREAK-IN SCHEDULE

Starting and driving

5-19

Advertising
This manual is related to the following products: