Changing engine oil filter -11 – NISSAN 2012 Maxima User Manual

Page 384

Advertising
background image

3. Turn the engine off and wait more than 10

minutes.

4. Place a large drain pan under the drain plug

A

(under the body).

5. Remove the oil filler cap

B

(inside the en-

gine compartment) by turning it counter-
clockwise.

6. Remove the drain plug

A

with a wrench by

turning it counterclockwise and completely
drain the oil.

If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil filter” later in this section.

Waste oil must be disposed of prop-

erly.

Check your local regulations.

WARNING

Prolonged and repeated contact with

used engine oil may cause skin cancer.

Try to avoid direct skin contact with

used oil. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.

Keep used engine oil out of reach of

children.

CAUTION

Be careful not to burn yourself. The engine
oil may be hot.

7. Clean and reinstall the drain plug and a new

washer. Securely tighten the drain plug with
a wrench. Do not use excessive force.

Drain plug tightening torque:

22 - 29 ft-lb (29 - 39 N·m)

8. Refill engine with recommended oil through

the oil filler opening, then install the oil filler
cap securely.

See

“Capacities

and

recommended

fuel/lubricants” in the “Technical and con-
sumer information” section of this manual for
drain and refill capacity.

The drain and refill capacity depends on the
oil temperature and drain time. Use these
specifications for reference only. Always use
the dipstick to determine when the proper
amount of oil is in the engine.

9. Start the engine. Check for leakage around

the drain plug and oil filter. Correct as re-
quired.

10. Turn the engine off and wait more than 10

minutes. Check the oil level with the dip-
stick. Add engine oil if necessary.

CHANGING ENGINE OIL FILTER

1. Park the vehicle on a level surface and apply

the parking brake.

2. Turn the engine off.

3. Place a large drain pan under the oil filter

A

.

4. Loosen the oil filter

A

with an oil filter

wrench by turning it counterclockwise. Then
remove the oil filter by turning it by hand.

CAUTION

Be careful not to burn yourself. The engine
oil may be hot.

LDI0642

Maintenance and do-it-yourself

8-11

Advertising
This manual is related to the following products: