Wireless amplifier, Specifications – MIPRO ma705(2ce161) User Manual

Page 10

Advertising
background image

- 8 -

Operating Manual

5. SPECIFICATIONS :

Specifications

Item

1. Max. Power Output

2. T. H. D.

3. FrequencyResponse

4. Speaker

6. Wireless Microphone

7. Antenna

8. C D Player

9. Audio Input

5. Receiver Module

10. Power Supply

11. Charging Time

12. Dimension

13. Weight

14. Exterior Color

Please Note:

50 Watts (RMS) in t o a 8

Load

Ω

< 0.1 %

50Hz ~ 18 Khz

3 dB

±

Built-in 8 Inch Full-range Speaker.

400 285 225mm

×

×

8.8 Kg

Black

Four Hours (Automatic Charging Management)

Balanced/Unbalanced Mic In Jacks and Line In Jacks.

Optional

Integrated

Up to 2 optional UHF or VHF receiver modules may be fitted
to a MA-705. Please consult with your local supplier for
frequencies

Suitable to use with MIPRO's hand held transmitter, o r bodypack
transmitter fitting with lavaliere or headworn microphones

Not all models are available in all markets and specific

modelconfigurations may vary from market to market. Please
consult with your local supplier for detail of the various
models/configurations available in your market.

The suitability of wireless microphone frequencies may

vary from location to location. Please consult with your
supplier for advice about frequencies suitable i n y o u r area. No
responsibility i s taken by Mipro for interference caused to/by
any wireless microphone frequency transmission/reception
under any circumstance.

Caution:

type.

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent

WIRELESS AMPLIFIER

Built-in two 12 Volt 2.7 A R echargeable Batteries and
90V ~ 264V Switching Power Supply.

Advertising
This manual is related to the following products: