MIPRO ma705(2ce161) - Manual (Page 11)

Operating Manual
- 9 -
1. PARTS NAMES AND FUNCTIONS
HANDHELD WIRELESS MICROPHONE
The microphone is modular indesign. (1) Grille (2) Anti-Rolling C olored
Ring (3) Cartridge (4)Housing (5) Battery Status Indicator (6) Power On-Off
Switch
(7) Battery Compartment (8) Battery Cap. It also incorporates
"Piltone & NoiseLock" dual-squelch to eliminate noise interference.
(Fig.1)
1. Grille: Protects the cartridge and prevents "POP" noise.
2. Anti-Rolling Colored Ring: For frequency identification. Its polygonal shape also
prevents the microphone from rolling when placed on a flat surface.
3. Cartridge or microphone element/insert.
4. Housing: Upper portion is connected to a capsule module. Internally, it houses the
transmitter PCB and battery compartment.
5. Battery Status Indicator: Indicates power on / off and the battery status. When the
power switch is turned ON, the red LEDs indicator flashes briefly, indicating normal
battery status. If no flash occurs, it means either no battery power or the battery is
discharged or installed incorrectly. If the indicator stays lit after powering on, it
indicates that the battery power is low and should be replaced.
6. Power On-off Switch: Slide the switch for power "ON" or "OFF".
7. Battery Compartment: Designed to accommodate one 9V battery.
8. Battery Cap: Covers the battery compartment.
1 2 4 3 7 6 5 8
V H F