MIPRO ma705(2ce161) - Manual (Page 14)

Operating Manual
HANDHELD WIRELESS MICROPHONE
- 1 2 -
1 2 3 4 5 6 7 8
MH-707F
MH-808F
1 2 3 4 5 6
1. Grille: Protects cartridge and prevents "POP" noise.
2. Anti-Rolling Color Ring: For frequency differentiation while its polygonal shape
prevents the microphone from rolling on a flat surface
3. Battery Compartment: Designed to accommodate one 9V battery.
4. Housing: Upper portion is connected to the capsule module and battery. Internally, it
holds transmitter PCB.
5. Battery Status Indicator: Indicates power on / off and the battery status. When the
power switch is turned ON, the red LED indicator flashes briefly, indicating normal
battery status. If no flash occurs, it means either no battery power or the battery is
discharged or installed incorrectly. If the indicator stays lit after powering on, it warns
the battery power is low and should be replaced.
6. Power On-off Switch: Slide the switch for power "ON" or "OFF".
1. Grille: Protects cartridge and prevents "POP" noise.
2. Anti-Rolling Color Ring: For frequency differentiation, while its polygonal shape
prevents the microphone from rolling on a flat surface
3. Battery Status Indicator: Indicates power on / off and the battery status. When the
power switch is turned ON, the red LEDs indicator flashes briefly, indicating normal
battery status. If no flash occurs, it means either no battery power or the battery is
discharged or installed incorrectly. If the indicator stays lit after powering on, it warns
the battery power is low and should be replaced.
4. Power On-off Switch: Slide the switch for power "ON" or "OFF".
5. Housing: Upper portion is connected to capsule module and battery. Internally, it
holds transmitter PCB.
6. Battery Compartment: Designed to accommodate one 9V battery.
7. Battery Cap: Covers the battery compartment.
8. Anti-roll Ring: For frequency differentiation.