MIPRO ma705(2ce161) - Manual (Page 4)

- 2 -
Back：
Operating Manual
9
6
8
5
7
Anti-Shock CD Player
DC Power Switch
A. Receiver Modules
B. Control Panel
Heat Sink
AC Input Socket
Battery Cover
(5) CD Player: Featuring an anti-shock mechanism. Please refer to the instruction
manual for CD player that is included in the package.
(6) DC Power Switch: Turns DC power on/off of the unit. The indicator glows when you
turn the power on. Please note that to avoid over-discharging or stressing built-in
batteries, it is recommended that you charge the unit immediately the LED indicator
flashes (indicating a low battery warning status). Otherwise, the unit will turn off
automatically at a preset, low DC power limit. Normal charging time is approximately
six hours and a built in protection circuit will prevent over-charging.
(7) Heat Sink: Designed specially to cool the built-in amplifier, please keep it adequately
ventilated.
(8) AC Input Socket: A built-in switch-mode power supply accepts for AC power inputs
ranging from 100V to 240V.
(9) Battery Cover : To protect the built-in batteries and power supply. If you need to
change the batteries, please observe the correct polarity and always keep the
battery full-charged.
Unless you experience a battery failure, changing or
uninstalling batteries should not be necessary. If in doubt, please contact your
nearest service agent or supplier.
WIRELESS AMPLIFIER