Casella CEL Apex personal sampling pumps - Manual (Page 23)

23
the bottom of the PC display. This indicates that the device is waiting to communicate with an
Apex Pump.
Best communication with the pump is achieved when the IR link is positioned in line with the IR
interface window of the pump, with the two devices no more than 60 cm (2 ft) apart.
The fold out sheet at the back of this book shows a diagram of the main menus and options
available from Pump Manager software.
6.4
Configuring the Software and Adding a Pump
Select a communication port then add pump and person identities to the software as follows.
1.
Select the Pump menu and see the following options.
Communications
Specifies the communication port to be used by the IR Transducer.
Program
Allows the TWA and the two user defined
programs available to the Apex Pro to be edited and sent to the pump
as described in Section 6.5.
2. Select the Communications option, then choose the port to be used from the
Communications Port dialog, normally COM1 or COM2.
Figure 11: Top Level Window