CIRCUTOR DHB Series - Manual (Page 11)

11
5. SERVICE
5.1. Display Description
Fig. 7. Description of the meter frontal plate
5.2. Messages after Switching the Supply on
After switching the supply on, the meter displays the meter name
DHB-2xx, and next the program version in the form „r x.xx” – where
x.xx is the number of the current program version or the number of a
custom-made execution. Next, the meter carries out measurements
and displays the value of the input signal. The meter sets automa-
tically the decimal point position, when displaying the value. The
format (number of places after the decimal point) can be limited by
the user.