CIRCUTOR DHB Series - Manual (Page 31)

31
6.5. Registers for Write and Readout
Table 9
The value is placed in 16-bit registers
write (w)/ readout (r)
Input type 4000 tYP1 w/r 0...4
Range Description Symbol
Value
0 0.0000
1 00.000
0 500U - voltage measurement in the 500 V range
1 100U - voltage measurement in the 100 V range
2 5A - voltage measurement in the 5 A range
3 1A - voltage measurement in the1 A range
4 HoUr -current time
Value
Reserved 4001 w/r
Reserved 4002 w/r
4003 Cnt w/r 1...3600
Measurement time expressed in seconds. This time
defines the averaging time of the measured value.
The displayed value is the mean value calculated
from the Cnt1 period.
Reserved 4004 w/r
Reserved 4005 w/r
Reserved 4006 w/r
Reserved 4007 w/r
4008 IndCp w/r 1...21
Number of points of the individual characteristic.
For the value 1, the individual characteristic is swit-
ched off. Segments of the individual characteristic
are defined by parameters Xn and Yn, where n
– point number..
Minimal position of the decimal point when display-
ing the measured value.
4009 d_P w/r 0...4
Description