Pengo RevTrak - Manual (Page 6)

6 PENGO RevTrak Manual
PRODUCT INTRODUCTION
The Pengo® RevTrak™ system is a electronic torque monitoring and data recording system developed for the helical
pier/anchor industry. The RevTrak™ system is a pressure differential system that continuously monitors, records
and displays the installation torque. As the pier/anchor is installed into the ground the RevTrak system will compute
the torque based on the pre programmed specifications of the Revolution™ series Anchor Drives and the differential
pressure reading.
The RevTrak™ system using pressure transducers will monitor the inlet pressure, outlet pressure and high/low speed
pressure of the Planetary Anchor Drive to calculate the torque. The Pengo® Revolution™ series Anchor Drives
are all configured with dedicated transducer ports on the hydraulic motor for accurate and easy installation. While
the RevTrak™ system can be adapted to work with other types of Anchor Drives the system is designed
specifically for use with the Pengo® Revolution™ series Anchor Drives. Additional hydraulic fittings and
mounting brackets (not provided) maybe necessary when using the RevTrak™ system with other types of Anchor
Drives. The RevTrak™ system is not recommended for use with other types of two speed Anchor Drives.
The RevTrak™ systems operator interface is unique in that it does not require any secondary software to operate.
All operator interface is via a LC digital display that can be mounted easily inside the cab of the prime mover. During
operation all installation data is recorded to a MMC/SD memory card. This nonvolatile memory card can store up
to 2 GB of data allowing for weeks of installation history to be captured. The SD memory card is stored inside the
data logger which is mounted on the same bracket as
the Display unit. The RevTrak™ system uses CAN
communication via electrical cables to communicate
between the Planetary Anchor Drive and the Display unit.
All data recorded to the SD memory card can be exported
to a PC using the supplied USB card reader. Once the
data is exported to a PC the data can be analyzed and
formatted using Microsoft® Excel. The time, date, Drive
model, differential pressure and torque are all displayed
once the data is exported into Excel.
TOLERANCES UNLESS OTHERWISE SPECIFIED
.X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
LBS Kg
0.00
TOP LEVEL
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL
BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS
BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY
MATERIAL
TITLE:
SIZE REV
SCALE: 1:1 SHEET 1 OF 1 HEAT TREAT
THIRD ANGLE PROJECTION
B
DATE CHECKED BY