TEKVOX 51T-HD Presentation Switcher - Manual (Page 16)

TEK 51T-HD Compact Presentation Switcher
TEKVOX, INC. 12 www.tekvox.com
4.2 Operations of IR
IR Remote 4.2.1
IR signals are transmitted bi-directionally between the TEK 51T-HD and TEK
TPHD402PR. Use the IR remote at the receiver to control the TEK 51T-HD or HDMI
source devices (via CEC function buttons).
ᬅ Standby button
To enter in/exit standby mode.
ᬆ Input channel selection buttons
INPUT 1 is for HDMI1, INPUT 2 for
HDMI2
…INPUT 5 for VGA2. AUTO button:
Enable/disable auto-switching mode.
ᬇ Volume adjusting buttons
MIC-/+: decrease/increase MIC volume
LINE-/+: decrease/increase line volume
MIC MUTE: mute/unmute MIC audio
LINE MUTE: mute/unmute line audio
ᬈ Menu operation buttons
MENU: press to enter the OSD menu or return to
the previous menu. EXIT: exit OSD menu.
OK: confirm button. ,,, : UP/DWON/LEFT/
RIGHT button, for value setting or page-turn,
Buttons in area a are also able to work in CEC
mode to enter the menu of HDMI source device.
P.P, ZOOM, S.M: shortcut button, to select display
mode.
ᬉ Resolution selection buttons
Select the resolution by pressing the
corresponding button. AUTO is for auto-selecting
the best resolution.
ᬊ CEC function buttons
These are for the HDMI input signal which
supports CEC. Includes PLAY, PAUSE, STOP,
MENU, REV (reverse) and FWD (forward).