TEKVOX 51T-HD Presentation Switcher - Manual (Page 7)

TEK 51T-HD Compact Presentation Switcher
TEKVOX, INC. 3 www.tekvox.com
2. Product Appearance
2.1 TEK 51T-HD Front Panel
1. Power indicator.
Turns red when power is on. Turns green when in standby mode.
2. LCD screen
Shows the real-time system working status.
3. SOURCE/AUTO
 Used as video source selection-button. Press to select one source, press again
to select the next source, switching circularly between HDMI1, HDMI2, HDMI3,
VGA1, and VGA2. The LCD screen will show the name of the selected source.
 Used as switching mode selection button. Press and hold 7 seconds or more to
enter into Auto-switching mode. Press and hold 7 seconds or more again to
enter into Manual-switching mode.
Note: Setting any VGA port to AV or YPbPr in Manual-switching mode, the system will
not be able to enter in Auto-switching mode. While in Auto-switching mode, setting any
VGA port to AV or YPbPr will automatically enter in Manual-switching mode with LCD
screen and RS232 control Firmware prompting
“Not support!”.
4. ENTER
Used to confirm selection in menu.
5. RESO/AUTO
 Used as output resolution manual switching button. Select between 1360x768,
1280x800, 1280x720, 1024x768, 1920x1200, 1920x1080, and 1600x1200.
 Used as output resolution switching mode selection button. Press and hold 7
seconds or more to enter into Auto-switching mode. Press and hold 7 seconds
or more again to enter into Manual-switching mode.