TEKVOX 51T-HD Presentation Switcher - Manual (Page 26)

TEK 51T-HD Compact Presentation Switcher
TEKVOX, INC. 22 www.tekvox.com
Command Function Feedback Example
50910% Confirm command CEC cmd: select
50911% Exit command Tog Menu CEC cmd: exit
50912% Pause CEC cmd: pause
图像整体向 移动
50913% Selected Device Power On Source power on
50914% Selected Device Power Off Source power off
50915% Enable CEC Auto Power Enable CEC Auto Power
50916% Disable CEC Auto Power Disable CEC Auto Power
TEKVOX Commands
511xx%
TekMonitor Macro Command
(xx= 01-30)
CMD: 01 - 30
Video Detection Feedback Signal On / Signal Off
Note:
1. Turn on/ off HDCP auto-management by sending serial commands.
a) When HDCP is set to active, whether or not the output source has
HDCP depends on the input source. If the input source has HDCP, the
output will also have HDCP, and vice versa.
2. When HDCP is set to Manual, the output always enables HDCP.
3. Screen output adjusting avails only when the screen output adjusting is on.
Send command 50678% to turn it on.
4. CEC commands with grey background avails only when CEC is on.
5. MIC precedence: In Mute mode, if the MIC noise detecting is on, the device
will unmute MIC automatically given the outer noise exceeds the limit of noise
detection. If you send 50696% to enable MIC precedence, the device will not
be able to change the mute mode, regardless of the noise level.