Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual User Manual
Page 12
Definitions
Network Menu
Item
Function
Options
ADTEC API
Command
Ethernet IP
Address
IP address of unit on your network
user-defined using <left/right
arrow> and <select> buttons
default is 192.168.10.48
*.sysd IPA 0
Ethernet Mask Defines the unit relative to the rest of your network
user-defined using <left/right
arrow> and <select> buttons
default is 255.255.255.0
*.sysd IPM 0
Ethernet
DHCP
Dynamic Host Configuration Protocol; allows
mediaHub to self-locate network Ethernet
parameters
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
default is OFF
*.sysd DHCP
eth0
GigE IP
Address
route of traffic in/out on IPTV
user-defined using <left/right
arrow> and <select> buttons
default is 192.168.20.48
*.sysd IPA 1
GigE Mask
defines unit relative to the rest of an IPTV network
user-defined using <left/right
arrow> and <select> buttons
default is 255.255.255.0
*.sysd IPM 1
GigE DHCP
Dynamic Host Configuration Protocol; allows device
to self-locate network GigE parameters
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
default is OFF
*.sysd DHCP
eth1
Gateway IP
Address
traffic director for off-LAN resources
user-defined using <left/right
arrow> and <select> buttons
default is 192.168.10.1
*.sysd GIP
Time Menu
Item
Function
Options
Adtec API
Commands
Time
specifies system time
user-defined using <left/right arrow> and <select>
buttons
*.sysd TIM
Timezone
specifies time zone unit
operates in
user-defined using <left/right arrow> and <select>
buttons
*.sysd TIZ
NTP Menu
Item
Function
Options
Adtec API
Commands
NTP Status
Network Transfer Protocol
Defines whether or not your unit is in sync with the
designated NIP server
none
NTP IP
Address
IP address designated for Network
Transfer Protocol
user-defined using <left/right arrow> and
<select> buttons
*.sysd NIP
Alarm Menu
Item
Function
Options
Event Record
Log of events outside of operating parameters
scroll up and down to view log items
Mirror Menu
Item
Function
Options
Adtec API
Commands
Host Mode
Designates whether the unit is mirroring another
server, or serving as a stand-alone client.
MirrorList
Client
*.sysd HOM
www.adtecdigital.com