Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 16)

Definitions
Item Function Options
Adtec API
Commands
Status provides information regarding decoder function
Playing, Idling, Multicast
Rec., etc
*.DCMD TRA
Confidence
Decoder turns confidence decode on or off; when active, this feature
allows content to be reviewed on a monitor prior to transport On
Off
*.ECMD CDE
Display Target
Television resolution; set to match resolution of the intended
display;
unit will scale up/ down to match.
See Supported Targets
below
*.DCMD VID
DVB-ASI
Mode
Enable or disable the DVB_ASI input port. If receive mode is
enabled, and a valid DVB-ASI signal is detected, the unit will
play the stream.
Off (disabled)
On (enabled)
DER
DLT (latency)
*.DCMD DVB
Program
Number Program Number in PAT & PMT packet identifies which
program is associated with which Video & Audio PIDs. 0x0001 - 0xFFFF are
valid ID assignments
*.DCMD DPN
Audio Track identifies audio track to be decoded
Track 1
Track 2
*.DCMD TSN
Display Resolutions
NTSC 1080P60*
NTSC-J 720P59
PAL 1080i59
PAL-M
720P24
720P50
720P60
1080P24
1080I50
1080P50
1080I60
* The mediaHub-HD 422's Decoder module only supports this display target for HDMI output. It does not actually decode
1080P60, but will scale and/or de-interlace its decoded video to produce 1080P60 for output on HDMI.
Note on VESA Resolutions: Rev. A Units support most VESA resolutions.
www.adtecdigital.com