Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 34)

Power Specification
AC Power Standard 3 pin computer power plug (Auto range 70-240 VAC Input)
Confidence Decode Specification
ASI Input 188 Byte MPEG2 Transport input
SDI Output HD and SD User-defined resolutions
HDMI Output HD and SD User-defined resolutions
Analog Video Output (Composite) SD only. NTSC and PAL
Gigabit Ethernet MPEG2 Transport Stream via UDP/RTP or FTP file transfer or SMB mount
Processor Specification
COM2 RS232 Control
COM1 RS232 Terminal
Ethernet Ethernet 10/100 management
USB 2.0 Not currently supported
Encoder Specification
ASI Outputs 1,2,3 3 mirrored 188 Byte MPEG2 Transport Out up to 211 Mbs
Analog Video Input SD Only
HD/SDI Input Auto sensing 270MB/1.4GB/3.0GB
HD/SDI Output 3G-reclocked
Encoder RS422 Connect to media source.9-pin master or slave mode for Sony Protocol control.
AES3 Digital Audio Input 1-4 Compressed or uncompressed terminating (75 Ohm) digital audio inputs.
GPI IO Tally
Parallel IO interface for Start, Stop, Status, Alarm, and general purpose
interfacing to control systems.
Analog Audio 1,2 Analog Balanced (600 Ohm) audio input. Stereo pairs (ch1 and ch2)
AES3 Digital Audio Output 1-2 Compressed or uncompressed terminating (75 Ohm) digital audio outputs.
SDI In
75 Ohm terminated Input, Video & Audio (SMPTE-259M for SD and
SMPTE-292M for HD) BNC
SDI Out 75 Ohm re-clocked source matched to Input Signal
www.adtecdigital.com