AMETEK APG-XT - Manual (Page 17)

Section 2. Installation and Configuration
Configuring
15
Rear Panel
Figure 2.2 XT/HPD Rear Panel with APG Interface
Rear Panel
Switch (S1)
Defaults
Table 2.1 Rear Panel Switch S1 Default Settings
Default: Local control (all switches OPEN).
Setting Function
S1-1 TTL Shutdown Logic Select
(OPEN=negative logic, CLOSED=positive logic)
S1-2 Resistive Current Program Select
S1-3 Remote Current Program Select
S1-4 Resistive Voltage Program Select
S1-5 Remote Voltage Program Select
S1-6 Tracking Select