Argox X Series - Manual (Page 107)

107
Stand-alone with Barcode Reader
This section covers stand-alone operation with barcode readers. It
is applicable with printer models:
Barcode Reader
Interface PS/2 RS-232
Printer
Language
PPLB PPLB
Model
X-2000V
X-2300
X-3200
X-2300E
X-3200E
X-1000VL
To use the printer in stand-alone operation with a barcode reader
(scanner), follow the procedure described below
1. Make a form for barcode reader. (Note that the form name
must be “READER” The form should include “ZS” command
to store to flash memory.)
2. Turn on the printer; download the form from PC to printer.
3. Set t
he parameter of “READER INSTALLED” on the LCD to
ON position.
4. Turn off the printer.
5. Connect the barcode reader to the keyboard interface.
6. Turn on the printer.
7. Check LCD for instructions of each data string and scan
barcodes to input data accordingly.