Argox X Series - Manual (Page 59)

59
1. Turn off the printer. Plug the power cord into the power outlet,
and then connect the other end of the cord to printer's power
connector. Connect a USB cable to the USB port on printer
and also on your computer.
2. Turn on the printer. If the printer supports Plug-and-Play, and
you have successfully connected it using a USB cable, then
the Windows Add Hardware Wizard will automatically detect
the printer and display a dialog that allows you to install a
driver. Click Cancel and do not install the driver using this
wizard.
3. Prepare the documentation and software CD-Rom from
printer package and then install to CD-Rom drive of your
computer. The CD-Rom will bring out the following prompt.
Click “Go”: