ARRIS 2247-N8-10NA User Manual User Manual
Page 19
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
18
Inactivity Timeout setting to specify how long the Internet connection will remain active after it becomes idle. Enter a time in seconds. If
you choose manual, you will need to manually connect and disconnect to your service provider from the Home page of the 2247-N8.
MRU
- Leave this setting at the default of 1492 unless your ISP instructs you to change the setting.
Bridging
- Use this setting if you require a device on the local area network (LAN) side of the 2247-N8 to establish a connection to your ser-
vice provider. In this mode, all traffic is passed through the 2247-N8, and it does not provide routing or security features.
Use Static IP Addressing
- use this option if your service provider has hard-coded your network information and provided you with the val-
ues needed below. Please note that using DHCP to obtain a WAN IP address is not currently supported in the Web user interface. Remember
to click Apply Changes when you have finished entering the information.
Static IP Address
Netmask
IP Gateway
Primary DNS Server
Secondary DNS Server
UPnP
- Universal Plug-n-Play is used by applications (typically games) that require a two-way path to be set up while the application is in use.
The default setting is enabled.