More ip subnets – ARRIS 2247-N8-10NA User Manual User Manual
Page 21
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
20
More IP Subnets
You can enable and configure up to seven secondary LAN IP subnets on your 2247-N8. Each subnet requires an IP address/subnet mask pair. If the
DHCP Server is enabled, you can enable DHCP service on each subnet by entering DHCP start and end addresses.
The 2247-N8 will serve DHCP addresses starting with the primary subnet and then serve addresses from additional subnets in the order they were
added.
Important:
the DHCP server for the primary subnet must be enabled and serving at least one IP address in order for the DHCP server feature to
serve addresses for additional subnets
More IP Subnets Page
Use the options below to configure additional subnets.
IP Address
- Enter the IP address for the 2247-N8 Gateway.
Netmask
- Enter the subnet mask.
Enable DHCP Server
- Use this option to enable or disable a DHCP server for the subnet
DHCP Start Address
- This address must be in the same subnet as the IP Address you entered above.
DHCP End
- This address must be in the same subnet as the IP Address you entered above.
Add this IP Subnet
- Click this button to add each additional subnet to the 2247-N8. Follow the instructions on the web page to edit or
remove a subnet.