Router password – ARRIS 2247-N8-10NA User Manual User Manual
Page 29
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
28
Pinhole Entry
Protocol - Choose UDP or TCP
External Port Range - Enter a single port where traffic will be received by the 2247-N8 from the Internet.
Internal Address - Enter the private IP address of a device on the 2247-N8 local area network where traffic for this pinhole will be
directed.
Internal Start Port - Enter a single port where traffic will be destined from the 2247-N8's LAN to the Internet.
Add this pinhole
- Click this button to add the pinhole entry. You can edit or remove an entry from the Pinhole List located directly
above the Pinhole Entry section of the Web page.
Note:
a separate pinhole entry is needed for each port that you wish to open. Pinhole entries are also specific to the protocol chosen.
Click the
Help
link while visiting the NAT Configuration Web page for additional information. Click
Apply Changes
to save your updates.
Router Password
The 2247-N8 allows two methods of access: restricted and unrestricted. Select the access method from the Router Password page.
Router Password Page
Unrestricted LAN Access
- When the check box is selected, any device on the local area network can access and make changes to the
2247-N8 configuration without providing a password.