ATEIS Messenger Series - Manual (Page 28)

Messenger Operating Manual
Page 28 of 38
The first folder that you see is the ‘PERSONAL, folder. Here you put all your relevant project
data. This data is also stored in the project file that can be saved and the essential data like,
lobe building data is also stored in the messenger together with the exported FIR/LOBE file.
These essential data files will be visualised in the next version on M-Control.
Everytime you press on the button ‘OK’, the result is calculated. In this stage you better go
through all the folders before you press on the button ‘OK’.
12.4. Visualisation screen:
In this screen you define the building data, like height, depth, height of the Messenger and the
frequency you want to evaluate. The field ‘RESOLUTION’ sets the image resolution that is
presenting the results on the screen of your PC. It has no influence on the results of the
calculated lobe. The resolution set to high just extents the calculation time, but it might be
required that you want to use a high-resolution picture for presentation purposes.
Everytime you press on the button ‘OK’, the result is calculated. In this stage you better go
through all the folders before you press on the button ‘OK’.
Functions:
Virtual Room Size:
Height Height of the ceiling.
Depth Depth of the object
Loudspeaker Placement:
Height Height of Messenger, measured from the floorlevel to the first driver.
Mech. Aiming If the Messenger is not placed 100% vertical, you can compensate for the
angle + and -. (We refer to the installation manual for more detailed
information)
Resolution Low, Middle, High. Sets picture quality
Plot scale Top, Bottom, left, right. The dB scaling position.
Frequency The lobe results at the given frequency
Note: It is proven that the 2000 Hz result matches with PINK-NOISE measurements in the
field. And it is easy to listen at. Other frequencies need to be played as sinewave and
measured as sinewaves. See it as a practical tool.