M-control, Messenger operating manual – ATEIS Messenger Series User Manual
Page 9
Messenger Operating Manual
Page 9 of 38
7.
M-Control:
All versions are controlled using the M-Control USB - 485 interface. This interface is available
from the pricelist. This interface is an electronic device that can only be used in conjunction
with the Messenger series of products and in conjunction with FIRMWARE VERSION V2.15
or higher. The device allows easy system configuration via a PC-link that is supported by
Windows
®
XP. (Other operating systems are not tested)
The software is a development of Ateïs International SA and is license free, but only available
for key-dealers and distributors. The M-Control interface combines access control and data-
link control and can be used as permanent interface or for configuration-use only. The
interface is delivered complete with a USB cable of approx. 1 meter and a CD with the
necessary driver software. The M-Control software and the Lobe-Assembler software are
also on this CD.
USB
RS 485 connection