Audio Enhancement TLD100 - Manual (Page 24)

24
When connecting multiple Infrared Sensors
Warning
• Before installing, be sure to turn off the power of the infrared sensor/receiver.
There is a risk of electric shock.
•
When connecting a single Infrared Sensor (EDS-07)
Connect the Infrared Sensor (EDS-07) to the EXT SENSOR connector of this unit. Set the No. 8 of the DIP switch
to OFF.
•
When connecting two or more Infrared Sensors (EDS-07) by utilizing the Infrared
Sensor Coupler (AE-DCF)
Using the Infrared Sensor Coupler (AE-DCF), it is possible to expand additional infrared sensors and to receive over a
much larger area.
When the infrared sensor coupler (AE-DCF) is utilized, make connections as shown in the illustration below.
Set the No. 8 of the DIP switch to ON.
Note:
• Improper setting of the DIP switch No. 8 may shorten the transmission range.
TLD100
EDS-07
Set the No. 8 of the DIP switch to OFF.
AE-DCF
EDS-07
EDS-07
EDS-07
TLD100
EDS-07
Coaxial cable
Coaxial cable
Coaxial cable
Coaxial cable
Set the No. 8 of the DIP switch to ON.