Avalon Firestyles 864 TRV GS2 Installation - Manual (Page 59)

Finalizing the Installation
(for qualified installers only)
59
Travis Industries 4140611 100-01385
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 49). Remove the logs and embers (if installed - page 52)
2 Remove the burners following the directions below.
Lift the rear burner, slide it to the right, and lift it from the firebox. The burner has a bracket that
inserts over two pins behind the burner. When replacing the burner make sure it is properly located.
Lift the front burner, slide it to the right, and lift it from the firebox. When replacing the burner make sure it is
properly located.
The rear burner air shutter support will need to be removed to access the orifice. Remove the support and
place it aside.