Finalizing the installation – Avalon Firestyles DVL Fireplace EF-2003 to 2007 User Manual

Page 28

Advertising
background image

2 8

Finalizing the Installation

Travis Industries

4041206

1 0 0 - 0 1 1 4 7

1

Remove the glass following the directions below.

Warning: The appliance must be completely cool before removing the glass.

Warning: Do not strike or slam the glass.

Note:

If using an Victorian Lace face, attach the arch covers after installing the glass.

Open the four latches holding the glass

frame in place (start with the two below

the glass) - follow the directions shown

to the right.

a

Twist 1/4 turn.

The spring pin will

disengage from the

latch bracket,

opening the latch.

Latch Bracket

Insert the 1/4” key

into the spring

pin.

Glass

Top of
Firebox

Spring Pin

Glass Frame

Lift the glass

frame up and

pull it forward to

remove.

b

Re-Attaching the Glass Frame:

a)

Hang the glass frame on the firebox.

b)

While holding in place, attach the upper latches

(follow the instructions to the right in reverse).

c)

Lift the glass frame slightly and attach the lower latches.

NOTE:

You may need to lift the glass

frame while re-attaching.

Advertising