Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 66)

Function Reference 4-25
sStatus = pcl I nit(&pConfig);
if (sStatus != 0)
printf("Init Failed \nError: %d", sStatus);
else
{
usStatus = pclGetBatteryLevel(); // Get the battery level
if (usStatus <= 711) // Display results
printf("Charge the battery");
else
if (usStatus >= 832)
printf("Can run and print");
else
printf("Can run/cannot print");
}
pclClose(); // Close Print subsystem
}