Baby Lock Imagine Wave (Previous Model) (BLE3ATW) Instruction and Reference Guide - Manual (Page 32)

NOTE: The threading path for the needle thread is different in this
technique. Please refer to the thread reference guide chart or
the illustration below.
1. Set up the machine for 2 Thread Flatlock - Wide. (See threading
illustration below)
2. A heavy decorative thread will be used in the needle.
3. Maxilock thread will be used in the lower looper.
4. Insert a size 90 Top Stitch needle in left needle position.
5. Swing the subsidiary looper in place on the upper looper.
6. Place Water Soluble Stabilizer on top of the fabric, along the
edge.
7. Stitch along the edge of the fabric. (Fig. A)
8. When finished stitching, pull the water soluble stabilizer to the
edge of the fabric. This will pull the stitching to the edge and will
look like a blanket stitch.
2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
30
Blanket Stitch - Decorative Stitch
A
B
C
NEEDLES
left
size 90 Top Stitch
Needle
LENGTH
4.0
WIDTH
7.5
STITCH
SELECTOR
A
WAVE
SELECTOR
O
A
B
C
D
B
C
D
O
O
A