Baby Lock Imagine Wave (Previous Model) (BLE3ATW) Instruction and Reference Guide - Manual (Page 41)

B
A
S
I
C
S
E
R
G
I
N
G
T
E
C
H
N
I
Q
U
E
S
39
Securing Ends (Cont.)
A
B
C
D
E
To lock the end of the seam:
1. Take one stitch off the end of the seam (fig. A).
2. Raise the presser foot and bring the needle(s) to the highet
position. Pull back gently on the fabric to clear the stitch
fingers.
3. Turn the fabric over with the wrong side of the stitch facing
up(fig. B), and reposition it under the presser foot with the
needle at the seam edge, aligned with the previous needle line
(fig. C).
4. Lower presser foot and sew 5-6 stitches over the previous
stitches, being careful not to cut them. You may want to flip the
cutting blade lock switch clockwise to the lock position. Pivot
the fabric and chain off, (fig. D-E).