Baumatic BFWM1407W.1 - Manual (Page 27)

27
Poor wash results
My garments are looking grey and there are limescale
deposits present in the drum of my washing machine.
o
There is not enough detergent being added.
o
The incorrect detergent is being used.
o
Stains are not being pre-treated.
o
The correct wash program or wash temperature was not
selected.
I have followed the advice given above, but my
garments are still coming out with grey stains on them.
o
The garments are soiled with oils, ointments or grease and
were washed without enough detergent.
o
The wash temperature selected was too low.
o
Fabric conditioner has come into contact with the garments. If
this happens try to wash out these stains as quickly as you
can and try to avoid getting conditioner on the garments in
future.
After the final rinse, I can still see foam.
o
Modern detergents can result in there still being foam in the
final rinse, this does not mean that the washing is not being
rinsed properly.
There is white residue on my garments when I remove
them from the appliance.
o
Modern detergents can contain insoluble contents; white
residue after a wash cycle is not necessarily a sign of the
garments being insufficiently rinsed by the washing machine.
o
You should shake out the garment or brush it off. In future
possibly turn the garment inside out before it is washed. You
may wish to move from a powder detergent and switch to a
liquid detergent instead.