Baumatic BFWM1407W.1 User Manual

Page 35

Advertising
background image

35

and empties at the same

time.

than the water level in the machine.

o

Check if the drainage pipe and sewage have been

sealed. If they have been, there will be poor

ventilation which causes siphoning.

No drainage of the

washing machine.

o

Check if the drainage pump is blocked.

o

Check if the drainage pipe is bent or blocked.

o

Check the height of the drainage nozzle and make

sure it is 0.6 – 1 meter from the bottom of the
washing machine.

Vibration of the washing

machine.

o

Level the appliance.

o

Fasten the footing.

o

Check the transportation bolts have been

removed.

The bubbles spill from the

detergent drawer.

o

Check if the detergent use is excessive.

o

Put one scoop of softener mixed with ½ litre of

water into detergent compartment II.

o

Reduce the usage amount of detergent in the

next wash.

The machine stops when

the program has not

finished.

o

Power failure or water supply cut-off.

The drainage pump

makes a noise during

operation when the water
has just been drained.

o

The inner barrel water of the washing machine

has been drained but there is still a small amount

of water in the drainage pump and pipe. The
drainage pump continuously operates and takes

in the air, and at this time there is noise which is

normal.

Machine stops for some

time during a cycle.

o

The machine adds water automatically.

o

There are too many bubbles in the tube so the

machine is cleaning the tube.








Advertising