Beurer PM 62 - Manual (Page 15)

14
5. T
RANSMISSION OF SIGNAL AND METHODS OF
D
EVICES
M
EASUREMENT
5.1 Receiving range of the heart rate monitor
Your heart rate monitor picks up the heart rate signals sent by the
chest strap transmitter within a range of 28 inches (70 cm).
5.2 Sensors on the chest strap
The entire chest strap consists of two components: the actual chest
strap and an elastic tension strap. On the inside of the chest strap
contacting the body, there are two rectangular, corrugated sensors.
Both sensors determine your heart rate and transmit this to the heart
rate monitor.
NOTE: The chest strap is compatible with other analogue devices,
using the same transmission frequency, such as e.g. ergometers.
Please see chapter "17 Technical specifications" for details.
5.3 Operating Range
The chest strap and the heart rate monitor should be worn or
mounted within 28 inches (70 centimetres) from each other. In case
of exceeding this length the monitor displays “0” HR.
6. G
ETTING STARTED
6.1 Activating the HR watch from transport mode
During transport the monitor is blank. You can remove the transport
mode by pressing the button
MENU and then START/STOP .