Beurer PM 62 - Manual (Page 29)

28
In the menu Training you can:
„
Stop your run times and thereby record your
training session.
„
Record individual laps.
„
Stop and save your recording.
„
Delete all recordings.
„
Analyze memory messages.
Once you are in the menu Training , your HR
monitor automatically switches to the main
display. This displays the already recorded
training time on the middle line (after
Save/Delete: 00:00:00) and on the line below
Start .
Things to know about the recordings
„ As soon as you have started the recording, your HR monitor
starts recording your training data. Your HR monitor continually
records your training data until you save or delete this. This also
applies when you first start training on the following day. The run-
ning time also allows you to stop your training session at any
time.
„
Your HR watch has a memory. The recording time is up to 24
hours and depends on the number of laps. A maximum of 50 laps
is possible for each training. Your HR watch informs you if the
memory is almost full. At this point, at the latest, we recommend
transmitting the recordings to your PC and thus emptying the
memory on the HR watch. Alternatively you can delete all re-
cordings manually. Read the section "10.5 Delete all recordings"
in this chapter to find out how to delete the recordings.