Asynchronous – BrightSign Object Reference Manual (FW 5.1) User Manual
Page 271
263
c.Scan(desc)
Asynchronous API
•
AsyncScan(parameters As roAssociativeArray) As Boolean: Begins a channel scan on the RF input
and returns the results immediately. Otherwise, the behavior and parameters of this method are identical
to
. When completed or cancelled,
AsyncScan() generates an roChannelManagerEvent, which supports
ifUserData and outputs two types of event:
o 0 – Scan Complete: Generated upon the completion of a scan. No extra data is supplied.
o 1 – Scan Progress: Generated upon every tune that is performed during the scan. GetData() returns the
percentage complete of the scan.
•
CancelScan() As Boolean: Cancels any asynchronous scans that are currently running. This method does
not generate an roChannelManagerEvent.
Synchronous Example
c = CreateObject("roChannelManager")
' Scan the channels
aa = CreateObject("roAssociativeArray")
aa["ChannelMap"] = "ATSC"
aa["FirstRfChannel"] = 12
aa["LastRfChannel"] = 50
c.Scan(aa)
' Start at the first channel
index = 0