BrightSign Object Reference Manual (FW 5.1) - Manual (Page 51)

43
• SetMultichannelAudioOutputs(array As Object) As Boolean:
• SetAudioOutput(audio_output As Integer) As Boolean
• SetAudioMode(audio_mode As Integer) As Boolean
• MapStereoOutput(mapping As Integer) As Boolean
• MapDigitalOutput(mapping As Integer) As Boolean
Note: MapDigitalOutput is not available on the HD2000.
• SetVolume(volume As Integer) As Boolean
• SetChannelVolumes(channel_mask As Integer, volume As Integer) As Boolean
• SetUsbAudioPort(a As Integer) As Boolean
• SetSpdifMute(a As Boolean) As Boolean
• StoreEncryptionKey(a As String, b As String) As Boolean
• StoreObfuscatedEncryptionKey(a As String, b As String) As Boolean
• SetStereoMappingSpan(a As Integer) As Boolean
• ConfigureAudioResources() As Boolean
• SetAudioStream(stream_index As Integer) As Boolean
• SetAudioDelay(delay_in_milliseconds As Integer) As Boolean: Adds a presentation time stamp
(PTS) offset to the audio. This makes it possible to adjust for file multiplexing differences. Delays are limited to
150ms or less. Currently, the system software only supports positive delays; therefore, if you need to set the audio
ahead of the video, you will need to use
SetVideoDelay() instead.
• SetVideoDelay(delay_in_milliseconds As Integer) As Boolean: Adds a presentation time stamp
(PTS) offset to the video. This makes it possible to adjust for file multiplexing differences. Delays are limited to
150ms or less.
Note: The following "Aux" functions are implemented only on the HD2000
•
SetAudioOutputAux(audio_output As Integer) As Boolean
• SetAudioModeAux(audio_mode As Integer) As Boolean
• MapStereoOutputAux(mapping As Integer) As BooleanSetVolumeAux(volume As Integer) As
Boolean