ConnectGear WR400 - Manual (Page 10)

10
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
6: Check each of the tabs and verify the following settings:
•
IP Address: Select Obtain an IP address from a DHCP server.
•
DNS: Let all fields are blank.
•
WINS: Let all fields are blank.
•
Routing: Let all fields are blank.
7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3 (Page 11).