ConnectGear WR400 - Manual (Page 27)

27
2.1.2 Password Settings
You can change the password required to log into the broadband router's system web-based
management. By default, there is no password. So please assign a password to the Administrator
as soon as possible, and store it in a safe place. Passwords can contain 0 to 12 alphanumeric
characters, and are case sensitive.
Parameters Description
Current Password Enter your current password for the remote management
administrator to login to your Broadband router.
Note: By default there is NO password
New Password
Enter your new password
Re-Enter Password Enter your new password again for verification purposes
for Verification
Note: If you forget your password, you’ll have to reset the router
to the factory default (No password) with the reset button (see
router’s back panel)
Idle Time Out
Login Connections (login to web-based management) without
any activity that go beyond this specified period (minutes) will