Cybex 751T Treadmill - Manual (Page 20)

Cybex 751T Treadmill Owner’s Manual
20
Electrical Power Requirements
The power requirements for this treadmill are a grounded, dedicated circuit rated for one of the
following:
• 100 VAC, 50/60 Hz, 20A
• 115 VAC, 60 Hz, 20A
• 220 VAC, 60 Hz, 15A
• 230 VAC, 50 Hz, 15A
• 230 VAC, 50 Hz, 13A, UK
Contact a qualified electrician to ensure the power supply complies with local building codes.
Do not use a ground plug adapter to adapt the 3-prong power cord plug to a non-grounded electrical
outlet. Do not use an extension cord.
Assembling the Treadmill
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Use extreme caution when assembling the
treadmill. Failure to do so could result in injury.
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage the
following procedure must be followed. A minimum of two people are required
to assemble this treadmill.
Tools Required
• 1/2” Socket wrench with a 4” extension
• 1/2” Box end wrench, 12 point
• 9/16” Socket wrench with a 4” extension
• Phillips screwdriver
The words “left” and “right” denote the treadmill user’s orientation.
Read and understand all instructions thoroughly before assembling the treadmill.
Each step number in the assembly instructions tells you what you will be doing. The lettered steps
following each step number describe the procedure required. Do not continue with step 2 until you
have carefully read all of the assembly instructions.
Verify you have received the correct package.
Read the sticker on the outside of the box and verify that the model number, color and voltage are
what you ordered. During step 3 and 5 you will verify that the contents of the box match the sticker.
Unpack and verify the contents of the boxes.
1. Lift up and remove the cardboard sleeve that surrounds the treadmill.