Cybex 751T Treadmill - Manual (Page 54)

Cybex 751T Treadmill Owner’s Manual
54
Every 15,000 miles (24,140 km).
• Replace running belt and flip deck.
• Check elevation assembly and replace worn parts.
• Lubricate elevation pivot points.
Every 30,000 miles (48,280 km).
Replace running belt and deck.
Resetting the service odometer.
1. While in Dormant Mode enter Statistics Mode by pressing the sequence CLEAR 999 and
ENTER. The ENTER key is active to advance to the next screen. The SPEED control keys are
also active to move forward or backwards in the menu.
2. Press the SPEED control keys to display “6-SERVICE” and miles or kilometers to the next
required service will be displayed.
3. Press and hold the CLEAR key for three seconds to reset the service odometer to 15,000
miles (24,140 km).
Service may be performed before the 15,000 miles (24,140 km) service prompt appears. Perform the
service on the unit and follow the above procedure to reset the service odometer to zero.
Displays the count-down to the next required service in miles remaining. Also allows for resetting this
odometer of a service has been performed.
Displayed as “SERVICE IN XXXXX MI (or KM)” where XXXXX is the distance until the next scheduled
maintenance. The odometer is set to 15,000 miles (24,140 Km). The Odometer counts down from
15,000 (24,140 Km) miles to 0 before displaying the Service message. Press and hold the CLEAR
key for three seconds while displaying the service odometer will reset it to 15,000 miles (24,140 Km).