Cybex 751T Treadmill - Manual (Page 32)

Cybex 751T Treadmill Owner’s Manual
32
Dormant Display Option (DORMANT STYLE):
This defines what is displayed in Dormant mode. Valid Choices for Dormant Display are:
0 – DEFAULT -
1 – TEXT MSG - Not Applicable.
2 – OUT OF ORDER - Out of Order message.
3 – CLOCK - Time clock.
4 – PROFILES - Displays program profiles.
Lock Combination (LOCK CODE).
This feature will allow the Lock Combination (PIN) to be changed. It requires the correct PIN number
to be entered first before allowing any changes.
The PIN numbers will be entered using the keypad. If an incorrect PIN number is entered, the number
will blink once and revert back to underscores. If a valid PIN number is entered, blink the ON or OFF
(default) text (whichever was previously stored) and allow the Speed Control Key to toggle it.
Custom Programs - (SAVE PROGRAM).
The ability to SAVE a workout session as a custom program during Review is enabled or disabled
here. If disabled, the SAVE button will not be active during Review. The text area will display Save
Program On or Save Program OFF (default).
Remember: You must press Enter after changing a value for that value to be stored.
3. To exit Set Up Mode press the Stop key once.
Your treadmill is now ready for use. Follow the instructions in the Operation chapter to learn how to
operate the treadmill. You should begin with walking speeds first, to be sure everything is functioning
properly.