Daktronics Gen VI Radio - Manual (Page 14)

8 Setting Radio Channels
Multiple Controller with Multiple Broadcast Groups
In a multiple controller system with multiple broadcast groups (Figure 7), there are many
consoles that control multiple scoreboards and/or scoreboard groups. The radio receiver
inside the scoreboard is set to broadcast group 1–8. By changing the console settings to the
specific broadcast group address, a single console can control all scoreboards or specific
groups of scoreboards. One example of this scenario is split court operation in basketball
installations, where scoreboards are used to score multiple games at once, but can be
grouped together to show one game if necessary. Refer to Drawing A-202943 as an example.
Figure 7: Multiple Broadcast Group
BCAST 1, CHAN 1 BCAST 1, CHAN 2
BCAST 1, CHAN 01 BCAST 1, CHAN 02
BCAST 2, CHAN 1 BCAST 2, CHAN 2
BCAST 2, CHAN 01
BCAST 1, CHAN 00
BCAST 2, CHAN 02
BCAST 2, CHAN 00
BCAST 0, CHAN 00
to control all at once
Or
BCAST 1 –2,
CHAN 01 –02
to control a specific
scoreboard/group