Daktronics Gen VI Radio - Manual (Page 21)

Troubleshooting 15
Loss of Server while testing: If the transmitter radio is no longer detected by a receiver (due
to excessive signal loss/interference), the receiver will wait for 10 seconds before returning to
normal operation. During this time, the display will blank the first two clock digits, and put
“00” on the second two clock digits.
Note: Location of information displayed will vary on scoreboard without clocks.
Scoreboard with LED clock colon: While running the tests, a receiver radio will periodically
flash the decimal indicator to denote an active running test. For instance, if the data
packet/signal strength values aren’t changing on the scoreboard, the flashing decimal helps
verify the test is still running and the radios haven’t disconnected.