Daktronics Gen VI Radio - Manual (Page 30)

THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2012 DAKTRONICS, INC.
DAKTRONICS, INC.
AV
DRAWN: DATE:
SHEET JOB NO: REV
ALL SPORT RADIO
INSTALLATION DRAWING; OUTDOOR SCBD GEN VI RADIO RECEIVER
MMILLER 07 AUG 12
P 1110 F 01 A
NONE
MMILLER
1109181
03
FUNC
CHAN
BCAST
0
1
2 3 4 5 6
7
8
0
1
2 3 4 5 6
7
8
0
1
2 3 4 5 6
7
8
- RADIO SETTING FROM FACTORY IS F=1, B=1, C=1. IF THIS SETTING IS
FINE FOR YOUR FACILITY LAYOUT, INSTALL RADIO INTO DISPLAY.
OR
OPEN RADIO CASE BY REMOVING 4 PHILIPS HEAD SCREWS.
ALWAYS LEAVE FUNCTION = 1, BUT CHANGE THE CHANNEL AND BCAST
DIALS AS NEEDED. USE SMALL FLAT HEAD SCREW DRIVER.
GREEN - POWER LED
RED - DATA LED
AMBER - STATUS LED
FACE SHEET
RADIO RECEIVER
RADIO PREPARATION
REMOVE THE SUPPLIED VELCRO
STRIPS FROM THE RADIO
"D" HOLE PUNCH IN
SCOREBOARD PANEL.
EXTERNAL ANTENNA
ON OUTSIDE FACE
OF SCOREBOARD.
ANTENNA PART
NUMBER AND SIZE
WILL VARY.
NUT
TOOTH LOCK
WASHER
FACE SHEET
CONNECTOR
LABELED "J45"
**OUTDOOR SCOREBOARDS ONLY**
DATE: REV BY:
01 27 MAR 14 KDD
PER EC-13907, ADDED OUTDOOR SCBD ONLY NOTE
DATE: REV BY:
02 26 NOV 14 KDD
ADDED "REMOVE VELCRO" NOTES
GYRUS VIEW
DATE: REV BY:
03 18 FEB 15 BJG
ADDED GYRUS VIEW
UPDATED RADIO RECEIVER AND LEGACY VIEWS
LEGACY VIEW
W-2913
6 -PIN PLUG