Led test, Display option (rate displays only) – Daktronics Remote Control System RC-100 User Manual
Page 31
DataMaster Applications
25
LED Test
Select LED TEST to test the LED digits on the display.
Display
Action
Press <ENTER> to cycle the display digits between all
LEDs on and all LEDs off.
Press <ENTER> send the test command to the display.
Press <CLEAR> to exit the test mode.
Display Option (Rate Displays Only)
Select DISPLAY OPTION to set the position of the decimal for the price display.
Display
Action
Press <ENTER> to set the display option or press
<CLEAR> to exit the menu.
The current configuration is shown on the bottom line of
the LCD. Press the down arrow key <
> to select one of
the following values:
$00.00 (default)
$0.000
$.0000
$0000.00
$000.00
$00
$000.0
Note: If the wrong configuration is selected for the display
being used, the price may not be displayed correctly.
Press <ENTER> when finished.
A screen will appear asking to confirm the selection.
Press <ENTER> again to update the display option.
LED TEST?
ENTER TO TEST
ENTER TO TEST
CLEAR TO EXI T
DI SPLAY OPTI ON
ENTER TO EDI T
DI SPLAY OPTI ON
$ OO.OO }
DI SPLAY $ OO.OO
ENTER TO UPDATE