DFI Q7-951 - Manual (Page 10)

1
10
Introduction
I/O Connectors
Expansion Slots
Board to board
Connectors
PCB
• 2 connectors for 4 external USB 2.0/1.1 ports
• 1 connector for an external RS232/422/485 serial port
• 1 LPC connector
• 1 I
2 C connector
• 1 CAN-bus connector
• 1 USB client connector
• 1 LVDS LCD panel connector
- 18/24-bit single channel
• 1 LCD/inverter power connector
• 1 8-bit Digital I/O connector
• 1 Digital I/O power connector
• 1 audio connector for line-in, line-out and mic-in jacks
• 1 S/PDIF connector
• 2 Serial ATA connectors
• 1 4-pin 12V/5V power connector
• 1 chassis intrusion connector
• 1 front panel connector
• 1 fan connector
• 1 SD/SDIO/MMC socket
• 1 mini PCIe socket
• One MXM connector
• 3.5” form factor
• 102mm (4.02”) x 147mm (5.79”)