Digi-Star EZ 320 - Manual (Page 14)

MODEL 320 - System Operation:
12
To Program a New Recipe: indicating the "entry method" to be used:
Enter the program mode by pressing and 1 - Pounds per Animal.
holding the [PROGRAM] key and then 2 - Percentage of Total Load.
pressing the [ON] key. Continue holding both 3 - Ingredient in Pounds.
keys until the indicator beeps and the scale
displays the message "PROGRM". The
Note: For more about entry methods see page
"recipe program annunciator" flashes. 23.
The scale then displays the first formula
number programmed "REC-XX" or will
display "REC-__" indicating that a recipe
number can be entered.
Step 1) Press [CLEAR]. "XXXX" represent the amount for this
Step 2) Then use the numeric keypad to select [LOAD/UNLOAD] to enter the value.
the recipe number. Then press [RECIPE #] to
enter the recipe number.
Step 3) The EZ 320 then displays a message
Step 4) "ING-__" is displayed immediately
following the entry message.
Use the numeric keypad to select the
ingredient number. Then press [INGR.#].
NOTE:Ingredient numbers DO NOT have to
be in sequence.
Step 5) "AMOUNT" will be shown on the
display followed by the prompt for the
ingredient amount with the display
"YY:XXXX".
The first two digits, "YY" represent the
ingredient number. The last four digits,
ingredient.
In this example, ingredient number "05" is
shown with an ingredient amount of "500".
Use the numeric keypad to select the four (4)
digit ingredient value. Then press